Bat-F Types; Bat-Rail Types; Bat54 Types - Hirschmann BAT series User Manual

The devices differ with regard to their design, the standards they support and
their certifications, as shown in the table below:
Design
Indoor

BAT-Rail types

BAT54-Rail
BAT54-Rail-Client
BAT54-Rail Single
BAT300-Rail
Table 3: Range of applications for BAT device types
1.1.1

BAT-F types

The BAT-F devices have protection class IP67. The devices are particularly
suitable for field use. You can mount the devices on a pole or on a flat surface
(e.g. wall).
BAT-X2 types

BAT-X2 devices are suitable for use in environments with the danger of
explosions (Ex zone 2 areas according to ATEX 95 / ATEX 100a).
1.1.2 BAT-Rail types
BAT-Rail devices are suitable for use on DIN rails and on machines in the
production area, as well as on vehicles. You can snap them quickly and
simply onto the DIN rail or mount them on a flat surface (e.g. wall). With 5-
way redundant voltage supply (4-way for the BAT-Client) and a vibration-
resistant metal housing, the devices provide high operational reliability.
1.1.3

BAT54 types

The BAT54 is a dual-band industrial wireless LAN access point/client with
two independent WLAN modules in accordance with IEEE 802.11a/b/g/h and
IEEE 802.11i. In particular, the devices support the security mechanisms,
authentication procedures and data encryptions defined in the IEEE 802.11i
standard.
16
Outdoor
BAT-F types
BAT54-F
BAT54-F Single
BAT54-F Client
BAT300-F
Ex range
BAT X2 types
BAT54-F X2
BAT54-F Single X2
BAT54-F Client X2
BAT300-F X2
Installation BAT
Release 05 03/2013