Labview Vis; Electrochemistry Accessories - Bio-Logic VMP-300-based Installation And Configuration Manual

specifically designed
battery type.
It is possible to test many batteries simultaneously by linking multiple holders in series.
NOTE: Before starting a measurement check if the contact between the battery and the
connector of the battery holder is efficient (stable voltage).

7.8 Labview VIs

The potentiostat can be controlled with the free EC-Lab
is devoted to software developers who need to integrate the control of the Bio-Logic
potentiostats/galvanostats/EIS with OEM software. The EC-Lab
includes a LLB LabVIEW
(Requirements: LabVIEW
specific functions for:
connection/disconnection to a selected instrument (Ethernet or USB),
-
- initialization of the channels by loading the firmware,
loading protocols on the channels:
-
all techniques available in EC-Lab
-
- starting/stopping the selected channel(s),
retrieving data.
-
Note that the time base with these LabVIEW
-

7.9 Electrochemistry accessories

Bio-Logic can provide accessories for many fields of electrochemistry and battery chemistry.
Please consult the Bio-Logic website for more details:
http://www.bio-logic.info/electrochemistry-ec-lab/accessories/
for each
®
library where the functions of the DLL are implemented
®
V8.5 or higher). This development package includes a DLL with
Manual for VMP300-based instruments
®
development package. This package
®
®
Express
®
Vis depends on the selected protocol.
development package
73