Software Installation On The Computer; Ec-Lab Software Installation - Bio-Logic VMP-300-based Installation And Configuration Manual

3. Software installation on the computer

Before turning on the instrument, it is recommended to first install the EC-Lab
®
EC-Lab express. For this operation, insert the CD-Rom in the computer. The installation is
automatically launched with the "Autorun" function. The first software to be installed is EC-
®
Lab . If your computer does not have a CD-Rom drive, all software can be downloaded from
the Bio-Logic website at:
®
3.1 EC-Lab software installation
18
http://www.bio-logic.info/electrochemistry-ec-lab/downloads/
®
Fig. 15: EC-Lab software installation. Step 1.
®
Fig. 16: EC-Lab software installation. Step 2.
Manual for VMP300-based instruments
®
software and/or