Ec-Lab ® Express Software/Oem Package Installation; Errors During The Installation - Bio-Logic VMP-300-based Installation And Configuration Manual

Manual for VMP300-based instruments
®
Fig. 21: EC-Lab software installation. Step 8.
At the end of the installation, the instrument will be detected via USB is and ready to be
connected and used. See 4: Connecting the PC to the instrument to connect to the instrument
with the software.
®
3.2 EC-Lab Express software/OEM package installation
®
The EC-lab Express software package is optional software which offers the user some
® ®
enhanced features and control over the regular EC-Lab software. Installation of EC-lab
®
Express is not required to operate the instrument provided that EC-Lab is installed. The
®
installation of EC-lab Express software and the OEM package is done in exactly the same
®
way as for EC-Lab . Please see the above section for the installation.
Express doesn't support the VMP-300.
®
NOTE: EC-lab

3.3 Errors during the installation

During the installation an error may occur if you are not the administrator of the computer.
In this case it is necessary to contact your network administrator for the installation.
Fig. 22: Error during the installation.
22