Controls & Components - Grizzly G0855 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–5 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
A
Figure 1. ON/STOP controls.
A. ON Button: Push to start motor. Insert pad-
lock through button to disable (padlock not
included).
B. STOP Paddle: Push to stop motor.
-4-
manual BEFORE
B
C D
H
Figure 2. Table controls and components.
C. Outfeed Table: Supports workpiece after it
passes over cutterhead. For optimum results,
outfeed table must be properly adjusted
even with highest point of cutterhead knives/
inserts.
D. Fence: Supports workpiece laterally as it
moves across cutterhead; determines angle
of cut when edge or bevel jointing.
E. Infeed Table: Supports workpiece before it
reaches cutterhead. Position of infeed table
relative to cutterhead knives/inserts deter-
mines depth of cut.
F. Infeed Table Adjustment Handwheel:
Rotate to adjust position of infeed table
(when infeed table lock is loosened).
G. Mobile Base Lock Knobs: Tighten to secure
jointer in position; loosen to move jointer.
H. Outfeed Table Adjustment Handwheel:
Rotate to adjust position of outfeed table
(when outfeed table lock is loosened). Only
used when setting outfeed table even with
cutterhead knives/inserts.
Model G0855/G0856 (Mfd. Since 02/19)
E
F
G
mobile base lock knobs