Table of Contents
Advertisement
Configuration (Bluetooth)
The EZ Link Strip Q6 BT can be operated with the BTAir application over a Bluetooth connection
(Bluetooth version 4.2):
1.
Download and install the BTAir app from your preferred app store.
2.
Press <MENU> repeatedly until bLE shows on the display.
3.
Press <ENTER>.
The app will find and pair automatically to all the BT series products within range.
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
Automatic Programs
To run the EZ Link Strip Q6 BT in automatic mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select an automatic program, from P 1–8.
4.
Press <ENTER>.
Auto-Program Speed
To set the auto-program speed on the EZ Link Strip Q6 BT, do the following:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Use <UP> or <DOWN> to increase or decrease the program speed, from S. 1–100.
3.
Press <ENTER>. The product will return to Auto mode.
Sound-Active Mode
To run the EZ Link Strip Q6 BT in sound-active mode, follow the instructions below:
1.
Press <MENU> repeatedly until Snd shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select a sound-active program, from Snd1–8.
4.
Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Preset Color Mode
To run the EZ Link Strip Q6 BT on a preset static color, do the following:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select a static color, from C 1–15.
4.
Press <ENTER>.
Custom Color Mixing
To mix a custom static color on the EZ Link Strip Q6 BT, do the following:
1.
Press <MENU> repeatedly until u-- shows on the display.
2.
Press <ENTER> and one of the following will show on the display:
•
r. _ _ _ (red)
•
G. _ _ _ (green)
•
b. _ _ _ (blue)
•
A. _ _ _ (amber)
•
S. _ _ _(strobe rate)
3.
Press <ENTER> to cycle through the options.
4.
Use <UP> or <DOWN> to increase or decrease the selected value, from 0–255 (for red, green,
blue, or amber) or from 0–100 (for strobe rate).
•
Strobe rate - 0: no function, 1–99: slow to fast, 100: sound-active.
5.
Repeat steps 3 and 4 until the color is set as desired.
Page 10 of 16
EZ Link Strip Q6 BT User Manual Rev. 1
Operation
Advertisement
Table of Contents
