Configuration (Bluetooth); Configuration (Standalone); Automatic Program; Auto Program Speed - Chauvet DJ COLORband Q3BT User Manual

Configuration (Bluetooth)

The COLORband Q3BT can be operated with the BTAir application over a Bluetooth connection.
1. Download and install the BTAir app from your preferred app store.
2. Press <MENU> repeatedly until bLE shows on the display.
3. Press <ENTER>.
4. The app will find and pair automatically to all the BT series products within range.

Configuration (Standalone)

Set the product in the standalone mode to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.

Automatic Program

To run a program on the COLORband Q3BT, follow the instructions below.
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select an automatic program, from P 1–8.
4. Press <ENTER>.

Auto Program Speed

To adjust the auto program speed on the COLORband Q3BT, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from S. 1–100.
3. Press <ENTER>. The product will return to the last selected.

Sound-Active Program

To run a sound-active program on the COLORband Q3BT, follow the instructions below.
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a sound-active program, from Snd1–8.
4. Press <ENTER>.

Sound Sensitivity

To adjust the sound sensitivity on the COLORband Q3BT, do the following:
1. Press <MENU> repeatedly until SEnS shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from u 0–100.
3. Press <ENTER>. The product will return to the last selected mode.
The product will only respond to low frequencies of music (bass and drums).

Static Color Mode

To run the COLORband Q3BT on a static color, follow the instructions below.
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a static color, from C 1–15.
4. Press <ENTER>.

Custom Color Mixing

To mix a custom color on the COLORband Q3BT, do the following:
1. Press <MENU> repeatedly until u-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
• r. _ _ _ (red)
• G. _ _ _ (green)
• b. _ _ _ (blue)
• A. _ _ _ (amber)
• S. _ _ _ (strobe)
3. Press <ENTER> to cycle through the options.
4. Use <UP> or <DOWN> to increase or decrease the selected value, from 0–255 (for red, green, or
blue) or from 0–100 (for strobe rate).
• Strobe rate - 0: no function, 1–99: slow to fast, 100: sound-active.
5. Repeat steps 3 and 4 until the color is set as desired.
Page 8 of 14 COLORband Q3BT User Manual Rev. 3
Operation