Replacing The Safety Contactor - Pitco Solstice SE Series Service Manual

Pitco Solstice Electric Fryers
Replacing the Safety Contactor
1. Remove the six (6) screws from the safety
contactor using a flathead screwdriver.
Wires to Safety Contactor Connections
Table
Safety Contactor
Connections
L1 (top)
L2 (top)
L3 (top)
T1(bottom)
T2 (bottom)
T3 (bottom)
2. Loosen the top screw on the safety contactor
using a Philips screwdriver.
SE Series Service Manual
Wires
1B
2B
3B
1D
2D
3D
26
3. Remove the bottom screw on the safety
contactor using a Philips screwdriver.
4. Remove the safety contactor.
5. Follow steps 1 through 10 in reverse to finish
the replacement of the new safety contactor.