Replacing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in
After Working Inside Your
home page at dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with non-touchscreen display.
1
Using the alignment posts place the camera module on the display back-cover and snap it into place.
2
Connect the camera cable to the camera module.
Post-requisites
1
Replace the
display
panel.
2
Replace the
display
bezel.
3
Replace the
display
assembly.
4
Follow the procedure from step 5 to step 9 in "Replacing the
5
Follow the procedure from step 3 to step 7 in "Replacing the
6
Replace the
base
panel.
70
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
palm
rest".
solid-state
drive" .