Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in
After Working Inside Your
home page at dell.com/regulatory_compliance.
Procedure
1
Adhere the coin-cell battery to the system board.
2
Connect the coin-cell battery cable to the connector on the system board.
Post-requisites
1
Follow the procedure from step 2 to step 7 in "Replacing the
2
Replace the
display
assembly.
3
Follow the procedure from step 5 to step 9 in "Replacing the
4
Follow the procedure from step 3 to step 7 in "Replacing the
5
Replace the
base
panel.
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
power-adapter
palm
rest".
solid-state
drive" .
port".
53