Table of Contents
Advertisement
Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in
After Working Inside Your
home page at dell.com/regulatory_compliance.
Procedure
1
Connect the power-adapter port cable to the system board.
2
Turn the system board over.
3
Replace the screws that secure the system board to the computer base.
4
Connect the speaker cable to the connector on the system board.
5
Align the power-adapter port to the computer base.
6
Align the screw hole on the power-adapter port bracket with the screw hole on the power-adapter port.
7
Replace the screw that secures the power-adapter port bracket to the power-adapter port.
Post-requisites
1
Replace the
display
assembly.
2
Follow the procedure from step 5 to step 9 in "Replacing the
3
Follow the procedure from step 3 to step 7 in "Replacing the
4
Replace the
base
panel.
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
palm
rest".
solid-state
drive" .
45
Advertisement
Table of Contents
