Removing The Status-Light Board; Prerequisites; Procedure - Alienware 13 Service Manual

Removing the status-light board

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in After Working Inside Your
home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the base panel.
2 Follow the procedure from step 1 to step 5 in "Removing the
3 Follow the procedure from step 1 to step 8 in "Removing the
4 Follow the procedure from step 1 to step 4 in "Removing the keyboard".

Procedure

1 Lift the connector latch and disconnect the status-light board cable from the status-light board.
1 status-light board
36
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
solid-state drive".
palm rest".
2 status-light board cable