Removing The Power-Adapter Port; Prerequisites; Procedure - Alienware 13 Service Manual

Removing the power-adapter port

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in After Working Inside Your
home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the base panel.
2 Follow the procedure from step 1 to step 5 in "Removing the
3 Follow the procedure from step 1 to step 8 in "Removing the
4 Remove the display assembly.

Procedure

1 Remove the screw that secures the power-adapter port bracket to the power-adapter port.
2 Lift the power-adapter port bracket off the power-adapter port.
3 Release the power-adapter port from the computer base.
4 Disconnect the speaker cable from the system board.
1 power-adapter port bracket
3 speaker cable
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
solid-state drive".
palm rest".
2 screws (2)
43