Removing The Display Assembly; Prerequisites; Procedure - Alienware 13 Service Manual

Removing the display assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in After Working Inside Your
home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the base panel.
2 Follow the procedure from step 1 to step 5 in "Removing the
3 Follow the procedure from step 1 to step 8 in "Removing the

Procedure

1 Open the display as far as possible.
2 Remove the screws that secure the hinge caps to the display hinges.
3 Slide and lift the hinge caps off the display hinges.
1 screws (2)
4 Close the display and turn the computer over.
5 Peel off the adhesive tape from the wireless card.
6 Remove the screw that secures the wireless-card bracket to the wireless card.
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
solid-state drive".
palm rest".
2 hinge caps (2)
39