Removing The Coin-Cell Battery; Prerequisites; Procedure - Alienware 13 Service Manual

Removing the coin-cell battery

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
instructions in After Working Inside Your
home page at dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS settings to default. It is recommended that you note the
BIOS settings before removing the coin-cell battery.

Prerequisites

1 Remove the base panel.
2 Follow the procedure from step 1 to step 5 in "Removing the
3 Follow the procedure from step 1 to step 8 in "Removing the
4 Remove the display assembly.
5 Follow the procedure from step 1 to step 5 in "Removing the

Procedure

1 Disconnect the coin-cell battery cable from the connector on the system board.
2 Peel the coin-cell battery off the system board.
1 coin-cell battery cable
52
Before Working Inside Your
Computer. For more safety best practices, see the Regulatory Compliance
Computer. After working inside your computer, follow the
solid-state drive".
palm rest".
power-adapter
2 coin-cell battery
port".