Making Lan Connections; 10/100/1000 Tp Copper Port - KTI Networks KGC-261-DP/G: KGC-261-DP/I Installation Manual

3. Making LAN Connections

3.1 10/100/1000 TP Copper Port

The 10/100/1000 TP copper port supports the following connection types and distances:
Network Cables
10BASE-T:
100BASE-TX:
1000BASE-T:
Link distance:
Auto MDI/MDI-X Function
This function allows the port to auto-detect the twisted-pair signals and adapts itself to form a valid MDI to
MDI-X connection with the remote connected device automatically. No matter a straight through cable or
crossover cable are connected, the ports can sense the receiving pair automatically and configure themselves to
match the rule for MDI to MDI-X connection. It simplifies the cable installation.
Auto-negotiation Function
The port is featured with auto-negotiation function and full capability to support connection to any Ethernet
devices. The port performs a negotiation process for the speed and duplex configuration with the connected
device automatically when each time a link is being established. If the connected device is also
auto-negotiation capable, both link partners will come out the best configuration after negotiation process. If
the connected device is incapable in auto-negotiation, the port will sense the speed and use half duplex for the
connection.
2-pair UTP Cat. 3, 4, 5 , EIA/TIA-568B 100-ohm
2-pair UTP Cat. 5, EIA/TIA-568B 100-ohm
4-pair UTP Cat. 5 or higher (Cat.5e is recommended), EIA/TIA-568B 100-ohm
Up to 100 meters for all above
-25-