Mounting The Device To A Din-Rail - KTI Networks KGC-261-DP/G: KGC-261-DP/I Installation Manual

2.3 Mounting the Device to a DIN-Rail

In the product package, a DIN-rail bracket is provided or has been installed for mounting the device in a
industrial DIN-rail enclosure.
The steps to mount the device onto a DIN rail are:
1. Install the mounting bracket onto the back of the device with screws as shown below:
2. Attach bracket to the lower edge of the DIN rail and push the unit upward a little bit until the bracket can
clamp on the upper edge of the DIN rail.
3. Clamp the device to the DIN rail and make sure it is mounted securely.
-17-