Lldp Table - KTI Networks KGC-261-DP/G: KGC-261-DP/I Installation Manual

5.5.3 LLDP Table

Status
Local Port
Chassis Id
Remote Port ID
System Name
Port Description
System Capabilities
Management Address
[Refresh]
Description
The port on which the LLDP frame was received.
(Port #1: TP port, Port #2: FX port)
The Chassis Id is the identification of the neighbor's LLDP frames.
Port ID of the neighbor port
System Name advertised by the neighbor unit
The port description advertised by the neighbor unit
System Capabilities describes the neighbor unit's capabilities.
The possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address is the neighbor unit's address that is used for higher layer
entities to assist discovery by the network management. This could for instance hold
the neighbor's IP address.
Click to refresh all statistic counters
-56-