Applying Power; Making Utp Connections - KTI Networks KGC-320 Installation Manual

The following figure illustrates the converter is installed with Din-Rail mounting bracket:

2.4 Applying Power

Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to
supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your
area.
The AC Power Adapter Specifications
Rated input voltage:
Rated input frequency:
Output voltage:
Output current:
Power cord:
Steps to apply the power to the device are:
1. Connect power adapter DC plug to the DC input jack located on the back of the unit before connecting to
the AC outlet.
2. Connect the power adapter to the AC outlet.
3. Check Power LED indication.

2.5 Making UTP Connections

The 10/100/1000 twisted-pair copper (TP) port supports the following connection types and distances:
Network Cables
100~240 VAC
50/60Hz
56VDC (+1%/-3%)
1.16A max.
De-attachable IEC320 AC power cord
-15-