Making Tp Port Connection - KTI Networks KC-351 Series Installation Manual

2.6 Making TP Port Connection

TP port is featured to support connection to:

Auto-negotiation devices

Auto-negotiation incapable 10BASE-T devices

Auto-negotiation incapable 100BASE-TX devices
Network Cables
10BASE-T:
100BASE-TX:
Link distance:
Configuration Setup
To make a proper connection, the following configuration settings are recommended:
TP port link partner
Auto-negotiation device
Fixed 10M half duplex device
Fixed 100M half duplex device
Fixed 10M full duplex device
Fixed 100M full duplex device
4-pair UTP Cat. 3,4,5 , EIA/TIA- 568 100-ohm STP
4-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP
Up to 100 meters
SW1
Off: auto
On: forced
On: forced
On: forced
On: forced
SW2 SW3
Off: full duplex Off: 100M
On: half duplex On: 10M
On: half duplex Off: 100M
Off: full duplex On: 10M
Off: full duplex Off: 100M
18