Ports - KTI Networks KGC-261-DP/G: KGC-261-DP/I Installation Manual

5.4.2 Ports

Port Configuration
Port
Link
Mode
Flow Control
Link Fault Relay Alarm Set relay alarm when port link fault
Function
TP - Twisted-Pair copper port (also specified Port #1 in other pages)
FX - Fiber port (also specified Port #2 in other pages)
Port link status
Speed and duplex status with green background - port is link on
Down with red background - port is link down
Select port operating mode
Disabled - disable the port operation
TP Mode
Auto
Forced 10 Half
Forced 10 Full
Forced 100 Half
Forced 100 Full
Auto 1000 Full
FX Mode Auto-negotiation Speed capability
Auto: auto-detection for transceiver type and speed
1000 Full Enable
Forced 100 Full Disable
Disable: Disable port operation
Set port flow control function
V - set to enable 802.3x pause flow control for ingress and egress
Auto-negotiation Speed capability
Enable 10, 100, 1000M
Disable 10M
Disable 10M
Disable 100M
Disable 100M
Enable 1000M
1000M
100M
-44-
Duplex
Full, Half
Half
Full
Half
Full
Full
Duplex capability
Full
Full