Table of Contents
Advertisement
SP600 installation and user's guide
www.renishaw.com
SH600 - STD
This product is fitted to all SP600 and SP600M probes and is compatible with the SP600Q probe. The SH600-STD offers the following
capabilities
M4 stylus compatibility
M3, M2 stylus compatibility using appropriate adaptors
Up to 200 mm stylus length can be accommodated.
SH600 - EXT
This product is fitted to all SP600Q probes and is compatible with SP600 and SP600M probes (manufactured after May 2002). The
SH600-EXT offers the following capabilities
M4 stylus compatibility
M3, M2 stylus compatibility using appropriate adaptors
Up to 300 mm stylus length capability
SCR600 stylus changing rack
The SCR600 is a stylus changing rack for use with the SP600 / M / Q. It does not require any electrical connection for operation. A
mechanism in the base provides overtravel protection in the probe entry direction. The rack can house up to four stylus modules and any
number of racks can be used in a system.
SCP600 stylus changing port
The SCP600 is a single stylus changing port, which is a component of a flexible modular stylus changing system. Several ports can be
fitted onto a Renishaw modular rack system (MRS / MRS2) at user defined spacing, depending on requirements. SCP600s are
particularly suited to the SP600Q probe, where for example star stylus clusters are unable to fit into an SCR600 stylus changing rack.
Issued 01 2018
12
Advertisement
Table of Contents
