Clean The Machine - Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions

As required
Fig. 190
Check adjustment and condition of scrapers
l
(Fig. 190), adjust or replace the teeth if neces-
sary.
To adjust the scrapers slacken the clamping
l
screws and push the scrapers towards the
drum, leaving a gap of about 25 mm.
Retighten the clamping screws.
l
124

5.44 Clean the machine

Caution
!
When using a steam cleaner for cleaning do
not subject electrical parts and insulation ma-
terial to the direct jet or cover these items be-
forehand.
Allow the engine to cool down before cleaning.
Fig. 191
Clean the machine (Fig. 191) thoroughly at
l
least once per week.
When used on highly cohesive soils, on cement or
trass-lime mortar or for similar work, the machine
must be thoroughly cleaned every day.
Please observe that the correct function of the
scrapers is ensured and that no material will build
up between rollers and frame.
BOMAG BW 213 D-4