Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 144

Cab assembly before initial start-up
Fig. 226
Connect the plug connection of the air condi-
l
tioning system (Fig. 226).
144
7.3 Final function tests and
checks
Caution
!
Make sure that all screws have been tightened
with the specified torque.
i
Note
After the cabin assembly the following tests must
be performed to assure that all cables and lines
are correctly connected.
Insert the ignition key and turn clockwise to po-
l
sition "1".
Operate the switches for headlights, direction
l
indicators and interior light to check their func-
tion.
Operate the switches for front and rear wind-
l
screen washer system and check their correct
function.
i
Note
If the function of the windscreen washer system is
reversed, the two washing water hoses must be in-
terchanged.
Start the engine.
l
Switch the air conditioning on by the switch.
l
After a five minute operation the cabin must
become noticeably cooler.
Switch the air heater on by the switch. After a
l
five minute operation the cabin must become
noticeably warmer.
Function of the seat contact switch.
l
Caution
!
The machine must not be operated if the seat
contact switch is not functioning correctly.
BOMAG BW 213 D-4