Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 137

Do not use fuses with higher ampere ratings and
do not repair fuses with a piece of wire. Fire haz-
ard.
BW 213 D-4
Cab assembly before initial start-up
7.1 Preparations
Danger
!
Danger of accident!
For transport purposes the driver's seat must
be tied down with cable straps thus to operate
the seat contact switch. Before resuming oper-
ation of the machine these cable straps must
strictly be removed to ensure safe and reliable
function of the seat contact switch.
Check the 4 lifting eyes on the cabin roof for
tight fit.
Fasten the lifting gear to all four lifting eyes.
Use lifting gear (chains or ropes) of sufficient
load bearing capacity. The minimum load bear-
ing capacity of the crane must be 1000 kg.
Do not stand or step under loads being lifted.
Fig. 200
Make sure that all fastening screws, washers,
l
spacers and nuts to fasten the cabin are avail-
able (Fig. 200).
Check whether rear rack, foot mat, step plate
l
and fastening kit are available.
BOMAG 137