Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 138

Cab assembly before initial start-up
Fig. 201
Fasten the lifting gear to the four lifting eyes 1
l
(Fig. 201).
Loosen possible fastening on the transport
l
pallet.
Slowly list the crane with a crane.
l
Danger
!
Danger of accident!
Do not stand or step under loads being lifted.
138
7.2 Cabin assembly
Danger
!
Danger of accident!
Use lifting gear (chains or ropes) of sufficient
load bearing capacity. The minimum load bear-
ing capacity of the crane must be 1000 kg.
Do not stand or step under loads being lifted.
Clean the operator's stand of dirt, oil and mois-
l
ture.
Fig. 202
Stick the supplied sealing tape 1 (Fig. 202)
l
along the edge of the operator's stand.
Caution
!
Only unroll and stick the sealing tape on just
before mounting the cab to the operator's
stand. The sealing tape will swell a few min-
utes after being unrolled. In this case the cabin
can no longer be mounted!
BOMAG BW 213 D-4