Changing The Hydraulic Oil Filter - Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions

i Note
The breather filter for the hydraulic oil tank is inte-
grated in the filler cap. You should therefore re-
place the complete filler cap.
Close the tank with a new cover.
l
BW 213 D-4
Every 2000 operating hours
5.37 Changing the hydraulic oil
filter
Danger
!
Danger of scalding!
There is a danger of scalding by hot oil when
unscrewing the filter.
Caution
!
If the filter has to be changed together with the
hydraulic oil, the filter should in any case be
changed after the oil change and the test run.
Do not use the oil in the filter bowl.
Environment
Catch running out oil, dispose of oil and filter
element environmentally.
i
Note
The filter element must be changed with every hy-
draulic oil change and after major repairs in the hy-
draulic system.
Fig. 175
Unscrew the cap nut 4 (Fig. 175) and take the
l
filter bowl (5) with the filter element (3) off.
Examine the sealing face on the filter element
l
thoroughly for any visible dirt.
Caution
!
Visible impurities may be an early indicator for
a failure of system components and predict the
BOMAG 113