Laser Safety Statement - Planmeca ProScanner User Manual

5 SAFETY PRECAUTIONS

5.1 Laser safety statement

8 Planmeca ProScanner
The computed radiography reader is certified in
the U.S. to Conform to the requirements of
DHHS 21 CFR, chapter 1 Subchapter J for
Class I(1) Laser Products, and Elsewhere is
Certified as a Class I(1) Laser Product
Conforming to the Requirements of IEC 60825-
1: 2007. Class I (1) Laser Products are not
Considered to be Hazardous. The Laser System
and Computed Radiography Reader are
Designed so there is never any Human Access
to Laser Radiation above a Class I (1) level
during normal Operation, user Maintenance or
Prescribed Service Condition.
• Wavelength: 658 nm (Typ.)
• Beam Divergence
Parallel: 9.5 degrees (-2.5/+2.5)
Perpendicular: 17 degrees (-3/+3)
• Maximum Power of Energy Output: 80 mW
(CW)
WARNING
Never operate or service the product with
the protective cover removed from laser/
scanner assembly. The reflected beam,
although invisible, can damage your eyes.
When using this product, these basic safety
precautions should always be followed to
reduce risk of fire, electric shock and per-
sonal injury.
WARNING
Use of controls or adjustments or perfor-
mance of procedures other than those speci-
fied herein may result in hazardous radiation
exposure.
User's & installation manual