Button Operation During Monitoring - Honeywell SLG 700 User Manual

Display Indicator
PV Status
PV Function Block
Mode
Process Variable Tag
Engineering Units
Bar Graph
Trend Graph

4.4.2 Button operation during monitoring

When the operator screens are active on the Advanced Display, the Increment and
Decrement buttons ( and ) can be used to move to the next or previous operator screen
Page 106
Good: The transmitter is operating normally
Bad: The transmitter has detected a critical fault condition.
The PV Status field will flash when this condition is present and the PV
Value will be displayed on a black background as follows:
Warning: When the status field indicates a Bad status, the displayed PV
value will represent the last known good value or will be set to 0 if the last
known good value does not exist. A Bad status indicates that the
displayed value may not represent the current process measurement and
should not be used for process monitor or control.
Unc: Uncertain (FF). The PV Value is outside of normal limits.
Uncertain (HART): The level cannot be found within the valid measuring
range. The transmitter will keep searching for a valid level and the current
is set to high saturation.
The Function Block Mode is only displayed for FOUNDATION Fieldbus
transmitters. The eight possible Modes are shown below.
OOS: Out Of Service
Auto: Automatic
Man: Manual
Cas: Cascade
User Configurable. This field has 14 characters
User Configurable. This field has 8 characters
Guided Wave Guided Wave
Radar Level: Radar Volume:
3
ft, in, m, cm, ft , in
mm Imp gal, barrels,
liquid barrels, yd
3
m
The limits of the bar graph are user-configurable for each screen.
The limits of the trend graph are user-configurable for each screen.
The amount of time visible on the Trend graph is also configurable.
SLG 700 SmartLine Level Transmitter User's Manual
Description
RCas: Remote Cascade
Rout: Remote Output
IMan: Initialization Manual
LO: Local Override
Temp:
°C
°F
3
, US gal,
3 ,
, liters
Other:
Percent (%)
milliamp (mA)
Custom Text
Level Rate:
ft/s, m/s,
in/min, m/h
Revision 7