Table 4-5: Display Config Sub-Menu - Honeywell SLG 700 User Manual

This table describes the Advanced Display menu's "Display Config" sub-menu.
Level 2
<Return>
Set Contrast
LCD
Contrast
<Return>
Set Password
(HART only)
Language (FF
read only)
Common Setup
Rotation Time
Screen Rotate
Revision 7

Table 4-5: Display Config sub-menu

<Return> Return to the Level 1 menu
Level 3
# #
####
English
French
German
Italian
Spanish
Russian
Turkish
# #
Yes
No
SLG 700 SmartLine Level Transmitter User's Manual
Description
Adjust the LCD contrast
level.
Range from 0 to 9.
Default: 5
Select 0 for minimum
contrast and 9 for maximum
contrast.
The user can set a 4-digit
numeric (0-9) password
Default: 0000.
If password is set to a value
other than 0000, display
would prompt for valid
password if user tries to
change device configuration.
User needs to provide
password only one time
when entering menu mode.
Select the language for the
Display.
Default: English
Time duration, in seconds,
that each configured screen
is shown before moving to
the next screen.
Range: 3 to 30 seconds
Default: 10 seconds
Activate rotation between up
to 8 screens.
If user selects 'Yes' ,
screens would rotate
automatically based on
configured Rotation Time.
Action
Press  to enter
menu selection
 and  to select
number.
 to enter and shift
to next digit
Press  to enter
menu selection
 and  to select
from list.
 to enter
Press  to enter
menu selection
 and  to select
number.
 to enter and shift
to next digit
Press  to enter
menu selection
 and  to select
number.
 to enter
Page 89