Process
Measurement
Page 92
<Return>
Single Liquid
Measured Prod
2 Liq Flooded
2 Liq NonFlood
Vapor DC
###.###
Product DC
Upper Prod DC
###.###
Lower Prod DC
###.###
Vapor Atten
Product Atten
###.###
Lower Prod Atten
###.###
Upper Prod Atten
###.###
###.###
Max Fill Rate
<Return>
Sensor Height
Max Product
###.###
Level
Level Offset
Echo Lost Time
###.###
SLG 700 SmartLine Level Transmitter User's Manual
Select the Measured
Product from the List
Applicable for single and
two liquids, non-flooded
only. If its value greater
than UP/LP DC Warning
message will be displayed
Applicable only for solid
and single liquid measured
products.
If its value is less than
Vapor DC Warning
message will be displayed
Applicable only for two
liquid measured products.
If its value is less than
Vapor DC or greater than
LP DC a warning message
will be displayed
Applicable only for two
liquid measured products.
If LP DC - UP DC <10 a
Warning message will be
displayed
Applicable for single and
two liquids, non-flooded
only. Attenuation of vapor.
Attenuation of product,
single liquids only
Attenuation of lower
product, two liquids only
Attenuation of upper
product, two liquids only
Maximum rate of filling or
emptying.
Range 0 to 100m
Range -100 to 100m
Time in seconds until a PV
Bad fault occurs after the
echo is no longer
detected.
Press to
enter
menu
selection,
and to
select from
list, to
enter
Press to
enter
menu
selection,
and to
select from
list, to
enter
Press to
enter
menu
selection,
and to
select from
list, to
enter
Revision 7