3.2 Mechanical Installation
Follow the steps in
Step
1
Check probe dimensions and strength.
Trim probe to correct length.
2
Attach/assemble the probe to the process connector.
3
4
Attach centering disk to probe if applicable.
5
Mount the transmitter.
Rotate electronic housing to desired view angle (on
6
models with optional display).
Secure the probe.
7
8
Install conduit entry plugs and adapters.
3.2.1 Check for correct probe dimensions and strength
Measure for correct probe length and check that your probe is within tensile or bending
load limits. See section
See Table 3-13: Probe length for different probe types
3.2.2 Accuracy and measuring range specifications
See section
2.4.3
Page 30
Table 3-2.
See Section
Table 3-2: Mechanical installation sequence
Action
3.2.2.1
for details.
SLG 700 SmartLine Level Transmitter User's Manual
3.3.1
for wiring and configuration steps.
See Section
3.2.1
3.2.3
3.2.4
3.2.5
3.2.6 & 3.2.7
3.2.11
3.2.12
3.2.13
Revision 7