Honeywell SLG 700 User Manual page 108

Backgrnd Type
Use Level
(Obstacle Backgrnd
Type only)
Start Capture
(capture process is
Backgrnd
inactive)
Capture
Cancel Capture
(capture process is
active)
<Return>
Probe Type
Probe Length
Probe End Type
CenterDiskType
Probe
Note: Loop
must be
removed from
CenterDisk Dia
Automatic
(Center Disk Type is
Control.
not None)
PropagtnFactor
Block Dist Hi
Block Dist Low
Page 96
Field
Obstacle
Yes
No
Custom
Rod
Wire
Coax
Multi-twist Wire
##.###
None
Clamp
Weight
Loop
None
316 SS
PTFE
C276 Ni Alloy
2 inch to 8 inch
#.######
#.###
#.###
SLG 700 SmartLine Level Transmitter User's Manual
Background type to
capture.
Use level instead of
distance to surface for
Obstacle capture length
entered at time of capture.
Begins a field background
capture process, with
progress indicated by bar
graph on line immediately
above.
For Obstacle captures, an
entry of the capture length
is first required.
Cancels the currently
active field background
capture process.
Type of probe.
Length of the probe in the
tank.
Value entered is
considered to be in Length
units.
Type of probe end.
Type of centering disk
Diameter of centering disk
Probe wave propagation
factor
Configures region near the
flange where
measurements are not
possible and inaccurate.
Value entered is
considered to be in Length
units
Configures region near the
Probe end where
measurements are not
possible and inaccurate.
Value entered is
considered to be in Length
units
Press ↵ to
select action
Press  to
enter menu
selection
 and  to
select number.
 to enter and
shift to next
digit
Revision 7