Engine Mount Installation - Seagull Models SEA 285 Assembly Manual

.
Seagull de Havilland Mosquito Twin Engine RC Warbird
Instruction Manual

ENGINE MOUNT INSTALLATION

Rudder servo arm.
1) Locate the items necessary to install the en-
gine mount included with your model
Elevator servo arm.
INSTALLING THE RECEIVER SWITCH.
Install the switch into the precut hole in
the side, in the fuselage.
2) Use four 4x20mm head bolts and
four 4mm washers to attach the engine
3/32" Hole.
mount rails to the firewall. Tighten the
screws . Make sure to use threadlock on
the screws to help prevent them from vi-
brating loose
Trim and cut.
.
Switch.
8