Table of Contents
Advertisement
Hand-held Spray Gun KS 5K
8 Troubleshooting
Personnel:
n
Qualified personnel
Among other factors, the spray pattern depends on the viscosity of the coating material. It can
be modified through the fluid pressure. If the optimal application cannot be achieved through
material pressure changes, it is recommended to try again with a different nozzle screw.
If the fault is not included in the following tables or if it cannot be eliminated with the measures
described, contact Krautzberger Customer Care.
Error
Unsatisfying spray pattern
8.1
Customer Care
Krautzberger GmbH
Customer service
Stockbornstr. 13
65343 Eltville am Rhein
+49 6123 - 698151
customercare@krautzberger.com
■ 200-0379
Cause
Nozzle screw possibly dirty
ENGLISH
Remedy
Clean nozzle screw and
replace if necessary (
Ä Chapter 7.6 'Replace nozzle
screw and seal' on page 37).
Insert a material filter in the
material supply line.
GB–39
Advertisement
Table of Contents
