Keysight Technologies N7020A User Manual page 47

5
Using the Power Rail Probe
The figure below shows how to solder the end of a N7021A pigtail cable to a DUT.
Figure 9 Soldering the Probing End of The N7021A Cable Across a Bypass Capacitor
To avoid accidentally shorting the circuit via the cable's exposed ground, place a small
CAUTION
strip of non-conductive tape onto the board before attaching the coax. To avoid undue
stress to the solder joints, tape the cable to the DUT.
N7020A and N7024A Power Rail Probes User's Guide 47