Table of Contents
Advertisement
Keysight N7020A and N7024A Power Rail Probes
User's Guide
6 Calibrating
N7020A / N7024A Probe's DC Attenuation/Offset Calibration Using N7022A Main Cable
N7020A / N7024A Probe's DC Attenuation/Offset Calibration Using N7023A Probe
Browser
Always calibrate the probe before making any critical measurements. A probe
calibration removes attenuation errors, offset errors, and timing delays that are
introduced by the probe. This chapter contains basic calibration procedures for
the supported Infiniium oscilloscopes. For additional information on the probe
calibration, refer to the oscilloscope's user documentation.
Always wear an ESD wrist strap when working with active probes. Not doing so can result
CAUTION
in the probe becoming permanently damaged.
The following calibrations are described in this chapter:
• N7020A / N7024A Probe's DC Attenuation/Offset Calibration Using N7022A
Main Cable
• N7020A / N7024A Probe's DC Attenuation/Offset Calibration Using N7023A
Power Rail Probe Browser
59
58
57
Advertisement
Table of Contents
