Using Direct Navigation - Invacare LiNX DLX-REM400 User Manual

The user must finish his current action to change the
function. Otherwise a function change blocked overlay is
displayed.

5.2.2 Using direct navigation

You navigate profiles and functions by moving from an active
function card to an adjacent function card. The function
card becomes active immediately.
Direct navigation is not performed with an active
user input (e.g. remote), since the active user input
is used to operate the active function card only
(e.g. moving the remote to drive). Instead, the user
navigates through the profiles and functions using
the touch screen or other control inputs.
Using swipe-and-tap mode
Changing function cards
1637423-E
Fig. 5-18
1.
Swipe over screen or tap navigation button to open
card preview display.
2.
Swipe left or right to change function cards.
3. Tap on selected function card, tap navigation button or
wait for a few seconds to activate selected function card.
Changing profiles
1.
Profile 1
Profile 2
Profile 3
Usage
29