Controls On Menu Screen; Settings On Menu Screen - Invacare LiNX DLX-REM400 User Manual

Also the status LED inside the ON/OFF button of the primary
remote is turned off.
1. Press ON/OFF button of primary remote to take over
control.
Attendant control powers down automatically.
For more information about using the attendant
control, refer to the manual of the attendant control.

5.1.1 Controls on Menu Screen

Buttons
Buttons are used to perform an action, such as
the screen.
Currently we use the following buttons on our remotes:
Symbol Action
Close screen
Go back to previous screen
Open next screen/level. It appears only if
a menu entry permit further settings.
Increase or decrease the value of hour or
minute on clock
,
1637423-E
1. Tap on button A to perform the action.
Switches
Switches are used to change between two different states,
such as ON and OFF. The current state is visible on screen.
to close
1. Tap on switch A to change the state.
Sliders
Sliders are used to change value of a setting continuously.
1. Tap and hold circle A within the slider.
2. Swipe circle to the right to increase the value. Swipe
circle to the left to decrease the value.

5.1.2 Settings on Menu Screen

The remote can be configured from Menu screen. Menu
screen offers different settings.
Fig. 5-1 Example of a button
Fig. 5-2 Example of a switch
Fig. 5-3 Example of a slider
Usage
23