Emergency Stop; Operating The Position Lights - Invacare LiNX DLX-REM400 User Manual

In this mode, you do not have fixed steps and can choose
the latched speed by yourself and then remain at that speed
for the programmed Latch Drive Timeout period as long as
no further demand is given.
Driving
1. Give and hold drive demand in direction (forward or
reverse) until wheelchair accelerates to desired speed.
2. Release drive demand.
Wheelchair speed is held constantly.
3. If maximum drive speed A is not reached, give and
hold drive demand again in same direction.
4. Release drive demand.
New speed is held constantly.
5. Give drive demand in opposite direction (reverse when
driving forwards or forward when driving in reverse)
to decelerate speed.
6. Release drive demand.
New speed is held constantly.
Stopping
• Give drive demand two times in same direction quickly
(less than one second),
• press external stop switch,
• perform emergency stop or
• let Latch Drive Timeout expire.

5.7 Emergency stop

If you press the ON/OFF button while driving, an emergency
stop is carried out. The remote powers down after this.
1637423-E

5.8 Operating the position lights

If you drive outside, turn on the position lights under
bad visibility conditions or darkness.
To operate the position lights, you need to stop the
mobility device.
Turn on position lights
1.
Tap Lighting control button A.
2.
Usage
47