Connectivity Cards; Configuring Connectivity Card - Invacare LiNX DLX-REM400 User Manual

Invacare® LiNX
• Lifter seat lockout
The drive electronics is equipped with an sensor to
prevent the seat lifter from rising up above a certain
point when the seat tilt or recline is adjusted above a
certain point. The drive electronics stops automatically,
a grey exclamation point is displayed on the seating
card and extend is inhibited A.
According to that, an icon with a seat and an
exclamation point is displayed in the status bar. This
indicator remains active until the lifter seat lockout is
deactivated by moving seat tilt or recline up.

5.16 Connectivity Cards

Connectivity cards allow you to communicate with external
devices. Connectivity functions supported by your remote
are a mouse mover and a switch control. By default, these
functions are disabled. Contact your provider to activate
Connectivity Cards.
62
Fig. 5-34
The mouse mover function allows you to control the
cursor on a PC or laptop's screen with a user input on the
wheelchair, such as the joystick on the remote module or
external joysticks. At the moment a four-quadrant operation
is needed to use the mouse mover.
The switch control function is an accessibility feature
that allows you to navigate and select items on your
mobile device (Android and iOS) using the remote's joystick
or touch screen.

5.16.1 Configuring Connectivity Card

Pairing the LiNX system with a user's device
To pair the LiNX system with a user's device (PC, laptop or
mobile device), open the connectivity settings menu.
1637423-E