Technical Specifications - Siemens SIMATIC S7 EIP-200S System Manual

EIP-200S Ethernet/IP Adapter

2.8 Technical specifications

2.8 Technical specifications
SIMATIC DP, interface module EIP-200S Ethernet/IP Adapter:2 Ethernet ports with RJ45
connectors; up to 2 m width connectable to a maximum of 63 power, electrical, or motor
starter modules.
SUPPLY VOLTAGE
INPUT CURRENT
POWER LOSSES
ADDRESS AREA
INTERFACES
PROTOCOLS
INTERRUPTS/DIAGNOSTICS/STATUS INFORMATION
GALVANIC ISOLATION
DIMENSIONS
WEIGHT
52
Power supply hold-up time
Hold-up time, min.
From supply voltage 1L+, max.
Power loss, typ.
Addressing volume
Outputs
Inputs
Supports protocol for Ethernet/IP
Automatic detection of transmission speed
Transmission rate, max.
RJ45 (2 ports)
Supports protocol for Ethernet/IP
Diagnoses
Diagnostic functions
Diagnostics indication LED
Module Status, Network Status, and I/O Sta-
tus LEDs
Monitoring 24 V voltage supply ON (green)
Connection to network LINK (green)
Between backplane bus and electronics
Between supply voltage and electronics
Between Ethernet and electronics
Width
Height
Depth
Weight, approx.
20 ms
250 mA
2.5 W
255 bytes
255 bytes
Yes
100 Mbps
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
60 mm
119.5 mm
75 mm
120 g
EIP-200S Ethernet/IP Adapter Distributed I/O System
System Manual, 06/2018, A5E44345053-AB