Features And Benefits Of The Eip-200S Ethernet/Ip Adapter - Siemens SIMATIC S7 EIP-200S System Manual

1.4

Features and benefits of the EIP-200S Ethernet/IP Adapter

The following table lists the features and benefits of the EIP-200S Ethernet/IP Adapter:
Features
Finely-graduated modular design:
•
•
•
Extensive range of electronic modules
Communication capacity, system-integrated
motor starter: direct and reversing starter to
7.5 kW
Permanent wiring due to the separation of
mechanical and electronic components
Individual connection of power modules to
common potential
DLR media redundancy
Robust structure for rough industrial condi-
tions (5 g vibration resistance)
Integrated voltage buses
Power bus up to 50 A for motor starters
Screw-type terminals, spring terminals, and
Fast Connect
•
•
Fast Connect
Terminal box in terminal module replaceable
Automatic coding of the I/O modules
Large label plate
With motor starters up to safety category 4 in
accordance with EN 954-1
EIP-200S Ethernet/IP Adapter Distributed I/O System
System Manual, 06/2018, A5E44345053-AB
1/2/4/8 channel electronic modules
Power modules
Integrated motor starters
2- and 3-wire connection, or
2-, 3-, and 4-wire connection
1.4 Features and benefits of the EIP-200S Ethernet/IP Adapter
Benefits
Structure
Function-oriented, cost-optimized station design
•
Considerable reduction in outlay for configuration
•
and documentation
Space savings due to arbitrary arrangement of
•
the modules
Broad area of application
PLC inputs and outputs, terminal blocks, circuit
breakers and contactors in a plug-in module save
space and the effort involved in wiring
Prewiring possible
•
Module replacement during operation of the
•
EIP-200S ("hot swapping")
Individual formation of potential groups (identifia-
•
ble by color coding of the TM-P terminal modules
for power modules)
Simple load interruption
•
Ring structures with Device Level Ring (DLR) sup-
port
High operating reliability when mounted directly on
the machine, high availability
Connection system
Reduced effort required for wiring
Minimization of wiring in 400 V range
A change in terminal connection method is not nec-
essary
Optimal selection on grounds of space and cost
Quick connection method with no stripping re-
•
quired
Saves time with wiring
•
No need to remove the terminal module in the event
of terminal damage
Quick and reliable module replacement
Adequate space for clear identification
Saves money on costly safety equipment
Product overview
13