Siemens SIMATIC S7 EIP-200S System Manual page 36

EIP-200S Ethernet/IP Adapter
2.6 Device profile: supported CIP objects
Attribute
ID
6
7
8
10
11
36
Access Name
rule
Set Interface
Control
Control Bits Interface Control Bits
Forced
Interface
Speed
Get Interface
Type
Get Interface
State
Get Interface
Label
Get Interface
Capability
Capability
Bits
Speed/Dupl
ex Options
Description
Configuration for physi-
cal interface
Speed at which the
interface shall be
forced to operate
Type of interface: twist-
ed pair, fiber, internal,
etc.
Current state of the
interface: operational,
disabled, etc.
Human readable idenfi-
cation
Indication of capabili-
ties of the interface
Interface capabilities,
other than
speed/duplex
Indicates speed/duplex
pairs supported in the
Interface Control attrib-
ute
Speed/Duplex Array
Count
Speed/Duplex Array
Interface Speed
Interface Duplex Mode
EIP-200S Ethernet/IP Adapter Distributed I/O System
Data type Semantics of values
STRUCT See section "Interface
of: Control" below.
WORD ----
UINT Speed in Mbps (10, 100,
etc.).
USINT
USINT
SHORT_
STRING
STRUCT
of:
DWORD Bit map
STRUCT
of:
USINT Number of Elements
ARRAY
of
STRUCT
of:
USINT Semantics are the same
as the Forced Interface
Speed in the Interface
Control attribute: speed in
Mbps.
USINT 0 = half duplex
1 = full duplex
2-255 = Reserved
System Manual, 06/2018, A5E44345053-AB