Preface - Siemens SIMATIC S7 EIP-200S System Manual

Preface

Trademarks
This manual references technologies whose names are trademarked by ODVA, the Open
DeviceNet Vendors Association. The ODVA technologies referenced in this manual include:
● EtherNet/IP™
● CIP™ (Common Industrial Protocol)
● QuickConnect™
For more information on ODVA and its trademarked technologies, visit the ODVA website
(http://www.odva.org).
Purpose of the manual
The information in this manual is intended to enable you to operate the EIP-200S Ethernet/IP
Adapter on Ethernet/IP.
Required basic knowledge
To understand this manual, it is necessary to have a general knowledge of automation
engineering.
Scope of the manual
This manual describes the following product:
EIP-200S Ethernet/IP Adapter
Certifications, Marks, and Standards
The EIP-200S Ethernet/IP Adapter complies with Ethernet/IP Specification CIP Networks
Library Volume 2: Ethernet/IP Adaption of CIP, Edition 1.22.
Refer to General technical specifications (Page 91) for more information.
Service and Support
In addition to our documentation, Siemens offers technical expertise on the Internet and on
the customer support web site (http://support.industry.siemens.com).
Contact your Siemens distributor or sales office for assistance in answering any technical
questions, for training, or for ordering S7 products. Because your sales representatives are
technically trained and have the most specific knowledge about your operations, process
and industry, as well as about the individual Siemens products that you are using, they can
provide the fastest and most efficient answers to any problems you might encounter.
EIP-200S Ethernet/IP Adapter Distributed I/O System
System Manual, 06/2018, A5E44345053-AB
3