Siemens SIMATIC S7 EIP-200S System Manual page 9

ET 200S components
The table below provides an overview of the most important components of the ET 200S
system:
Component
Rail
Interface module: EIP-200S
Ethernet/IP Adapter
Terminal module
Power module
EIP-200S Ethernet/IP Adapter Distributed I/O System
System Manual, 06/2018, A5E44345053-AB
Function
Carries the ET 200S. You mount the ET 200S on the
rail.
Connects the ET 200S with the EIP-200S Ethernet/IP
Adapter and prepares the data for the electronic
modules and motor starters.
Carries the wiring and receives the power and elec-
tronic modules. Terminal modules are available in the
following variants:
For power modules
•
For electronic modules
•
With screw-type terminal
•
With spring terminal
•
With Fast Connect (quick connection method, no
•
stripping required)
Monitors the voltage for all the electronic modules in
the potential group. The following power modules are
available:
For a 24 VDC supply with diagnostics
•
For a 24 to 48 VDC supply with diagnostics
•
For a 24 to 48 VDC, 24 to 230 VAC supply with
•
diagnostics and fuse
1.2 What is the ET 200S distributed I/O system?
Drawing
Product overview
9