EtherNet/IP
5.1
Functions/parameters/address space
5.1.1
Supported EtherNet/IP functions
Supported functions
The table below shows the functions that the I/O device supports with EtherNet/IP.
Supported functions
I/O communication with scanner
Parameter assignment
Reading diagnostics
Normative CIP objects
Reset to factory settings
Diagnostics bit in data status of cyclic I/O data per submodule
Shared device functions
EtherNet/IP basic service
Reading events (hardware interrupts)
Data record interface
Supported diagnostics
The table below shows the diagnostics that the I/O device supports with EtherNet/IP.
Supported diagnostics
Reading diagnostics via CIP EtherNet/IP
Reading diagnostics with MFCT
Reading hardware interrupt via CIP EtherNet/IP
PULL/PLUG event EtherNet/IP
Reading service data with MFCT
I/O device digital inputs DI 8x24VDC M12-L 8xM12 (6ES7141-6BG00-0BB0)
Equipment Manual, 03/2023, A5E46570417-AD
5
Remarks
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
Remarks
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
Not supported
FW 5.1.x or higher
35