Operation; Zeroing The Display - Adam Equipment CCT Series User Manual

6.0 OPERATION

SETTING THE WEIGHING UNIT: lb or kg
The scale will turn on displaying the last weighing unit selected, either kilograms or pounds. To
change the weighing unit press the [Units] key.
To change the weighing unit press the [SETUP] key and use the [1] or [6] keys to scroll through
the menu until 'units' appears on the display. Press [Tare]
In the 'count pcs' display the current weighing [word deleted] will be displayed (kg,g or lb) with
either 'on' or 'off'. Pressing [Tare]
[6] keys to change between On/Off and use the [Tare]
If necessary press the [CE] key to clear the unit weight before changing.
6.1

ZEROING THE DISPLAY

•
You can press the [0] key at any time to set the zero point from which all other
weighing and counting is measured. This will usually be necessary only when the
platform is empty. When the zero point is obtained the "Weight" display will show the
indicator for zero.
•
The scale has an automatic re-zeroing function to account for minor drifting or
accumulation of material on the platform. However you may need to press [0] to
re-zero the scale if small amounts of weight are still shown when the platform is empty.
Adam Equipment 2018
©
cycles through the weighing units available. Use the [1] and
to select.
button to select.
13