Setting Unit Weight; Weighing A Sample To Determine The Unit Weight; Entering A Known Unit Weight - Adam Equipment CCT Series User Manual

6.3.1 Setting Unit Weight

In order to do parts counting it is necessary to know the average weight of the items to be
counted. This can be done by weighing a known number of the items and letting the scale
determine the average unit weight or by manually inputting a known unit weight using the
keypad.
A. Weighing a sample to determine the Unit Weight
To determine the average weight of the items to be counted, you will need to place a known
quantity of the items on the scale and key in the number of items being weighed. The scale
will then divide the total weight by the number of items and display the average unit weight.
Press [CE] anytime to clear the unit weight.
•
Zero the scale by pressing the [0] key if necessary. If a container is to be used,
place the container on the scale and tare by pressing [Tare]  as discussed earlier.
•
Place a known quantity of items on the scale. After the weight display is stable, enter
the quantity of items using the numeric keys and then press the [Smpl] key.
•
The number of units will be displayed on the "Count" display and the computed
average weight will be shown on the "Unit Weight" display.
•
As more items are added to the scale, the weight and the quantity will increase.
•
If a quantity which is smaller than the sample is placed on the scale, then the scale will
automatically enhance the Unit Weight by re-calculating it. To lock the Unit Weight and
avoid resampling, press [U. Wt./Units].
•
If the scale is not stable, the calculation will not be completed. If the weight is below
zero, the "Count" display will show negative count.
B. Entering a known Unit Weight
•
If the unit weight is already known then it is possible to enter that value using the
keypad.
•
Enter the value of the unit weight in grams, using the numeric keys followed by
pressing the [U. Wt./Units] key. The "Unit Weight" display will show the value as it
was entered.
•
The sample is then added to the scale and the weight will be displayed as well as
the quantity, based on the unit weight.
Adam Equipment 2018
©
15