Table of Contents
Advertisement
5.0
BASIC OPERATION
5.1
SWITCHING THE BALANCE ON
Plug in the unit using the adapter or use the internal rechargeable battery. It is
recommended that you charge the battery for at least 8 hours before first use.
1) To turn on press the [On/Off] key once and release. The scale will show the
software revision, the battery voltage, and then a self-test before showing the
stable sign and zero weight on the display.
2) The scale can now be used.
3) To turn the scale off after use press the [On/Off] key again. There is an auto
power-off function that will automatically turn the unit off if not used for a
period of time. This can be set in the parameters section 6.0.
5.2
ZEROING
You can press the [Zero] key to set a new zero point and show a zero reading. This
may be necessary if the weight reading is not indicating zero with nothing on the
platform, and should be done if required before each new weighing takes place. The
zero indicator will show up in the upper left corner of the LCD when the scale
displays Zero.
5.3
WEIGHING UNITS
To change the displayed weighing unit, press the [kg/lb] key which will then cycle
you through the available options of weighing units. This can only be done before or
after a weighing takes place.
5.4
HEIGHT UNITS
To change the displayed height measuring unit, press the [cm/ft] key which will then
cycle you through the available options of height measuring units. This can only be
done before or after a weighing takes place.
All manuals and user guides at all-guides.com
7
© Adam Equipment Company 2012
Advertisement
Table of Contents
